Tata Pink

Application Procedure

Complete and careful mixing of the Tata Pink flooring colours and cement is imperative for best results. Tata Pink should be mixed with grey or white cement in the proportion 1:3 or 1:4 (colour of cement), depending upon the desired depth of the colour- [Grey cement is recommended for deep shades and white cement for pastel shades].
Moreover, to eliminate the occurrence of patches and also to produce a smooth and uniform finish, the colorant and cement must be mixed in a dry state before adding water. The mixture has to be applied by trowelling. A 24 hour gap has to be maintained before curing is undertaken for setting.

Precaution

• For better results, it is necessary to prepare a homogenous mixture of Tata Pink and Cement in a dry state before
adding water.
• The chore of mixing and application must be done by an experienced mason.
• The dry mixture should be prepared just before applying it.
• The wet floor surface must be protected from dust, direct sun light and damage of any other nature.
• Use of chalk powder with the dry mixture of colours and cement must be avoided as it dilutes the
intensity of the colour
• Any contact between Tata Pink and acids or acidic materials must be prevented.
• Tata Pink may be used for interior and protected exterior surface only.
• Tata Pink is not recommended for exterior use because of its poor light stability.

Polishing

Buffing and polishing should be undertaken after the floor has been allowed to dry for a week. More time will ensure a better hardening.

Packing

Tata Pink is packed in 1/2 kg HMHDPE pouch with liner.
 

 
TATA-Pigment | Close
 

Products